R1250GS Brake Pedal Extender
GS only (not required and will not fit on Adventure model)
We are very proud to present our very first 3D printed part following substantial investment in this new technology. Although, here at Cymarc Bike parts, we work as a tight team to jointly provide high quality parts it must be acknowledged that this product is the result of Aaron`s skills and abilities with this new tech.
Many riders, and indeed Mark personally, have often benefited from an extension of the rear brake pedal to allow for better braking without having to angle the foot too sharply forward.
What Aaron has designed and produced is a printed part that securely fits into the brake pedal and raises the pedal by approx 10mm, bringing it closer to the horizontal with the footrest. The extension itself is further secured by the use of a very sturdy stainless steel bottom plate and a stainless steel M6 countersunk fastener.
It features a rugged design in keeping with the GS philosophy and offers a good level of grip when compared to some alternatives on the market which use just a flat surface for contact with the foot.
It can be fitted in minutes and offers a well priced solution to eliminating that `gap`.
"I`ve road tested Aaron`s new product on my R1250GS. For me it`s excellent and gives me much more `feel` especially when feathering the brake going into corners" (Mark Hooton, June 2019).
Supplied with M6x35 Csk Fastener
Brake pedal extender
So simple but effective as usual. Very well made and does the job.
Steve Laughton | Lancashire | October 2021
Makes a big difference
From day one of owning my GS Rallye I thought the rear brake pedal was too low and consequently the rear brake was not fully effective when I used it. Like others I looked at all the expensive options then a chance conversation with another GS owner brought me to Cymarc.
This is a well made item with quality materials, easy to fit, looks good and is great value for money its absolutely spot on! The brake pedal now feels in the correct position and makes the bike better to control at slow speeds. Well done Cymarc!
Paul Hobson | Hedon | October 2020
Excellent addition, makes the rear brake pedal useable
Recently fitted one of these to my R1250GS Exclusive TE - and what a difference it has made. I was never happy with the standard brake pedal (I even had BMW see if they could raise the pedal / improve the travel, but they couldn't), the addition of this extender has made something which essentially was unuseable, useable!Easy to fit (fits in under a minute), and fits very securely.
The only thing I would suggest is that a bit of blue loctite on the screw before bolting up.
Dave Hawke | Billericay | September 2020
Brake pedal extender
Despite COVID I received item in a short time. Have attached item and it appears to be strongly made and robust (time will tell). Easy to fit and fits well.
Ian Rutherford | Telford | June 2020
Great improvement over standard
I have only just got my new R1250gs raylle have done about 2k and think it’s great. However standard rear brake pedal very low feels wrong. I looked at replacing whole pedal from Touratech but mega bucks. I came across this product and thought at the price I would give it a go. It fits well very easy and makes a big difference, it’s just what I needed makes rear brake perfect stood up or sat down. Brilliant value for money I very happy😁
Roger | Staffordshire | June 2020