PRODUCT DESCRIPTION
This is an assembly which was originally designed to help another customer fit a Nautilus MSX horn to his 2007 R1200GSA which seemingly didn`t have the headstock locating lugs which normally allow the horn to be fitted very close to the original horn.
Consequently the only other option was to mount it off a crash bar.
The bracket is made very strongly using 2mm thick stainless steel and clamps to a 22mm dia crash bar. It comes with a long and short heavy duty M8 hexagonal spacer which allows some further flexibility on placement.
The images show the horn fitted to my 2014 R1200GSA LC crash bar just under the LH (when sat on the bike) radiator housing however the bracket can be fitted anywhere on any 22mm dia tube - ensuring that any cables to the horn will reach of course.
The full kit consists of:
1x large bracket
1x small bracket
2x M6x15 socket head screws
2x M6 nylocs
4x M6 washers
1x M8 hexagonal 30mm lg spacer
1x M8 hexagonal 20mm lg spacer
1x M8 nyloc
1x M8 washer
Consequently the only other option was to mount it off a crash bar.
The bracket is made very strongly using 2mm thick stainless steel and clamps to a 22mm dia crash bar. It comes with a long and short heavy duty M8 hexagonal spacer which allows some further flexibility on placement.
The images show the horn fitted to my 2014 R1200GSA LC crash bar just under the LH (when sat on the bike) radiator housing however the bracket can be fitted anywhere on any 22mm dia tube - ensuring that any cables to the horn will reach of course.
The full kit consists of:
1x large bracket
1x small bracket
2x M6x15 socket head screws
2x M6 nylocs
4x M6 washers
1x M8 hexagonal 30mm lg spacer
1x M8 hexagonal 20mm lg spacer
1x M8 nyloc
1x M8 washer
PRODUCT INFORMATION
CUSTOMER REVIEWS
Write an online review and share your thoughts with other shoppers!
Be the first to review this product