BUNDLE (15% OFF) - Suzuki V-Strom Foot peg lowering Kit + Gear Change Enhancer
£85.55
£71.29 (ex. VAT)
-945-p.jpg?v=2832022-124912)
-945-p.jpg?v=2832022-124912)
-945-p.jpg?v=2832022-124912)
-945-p.jpg?v=2832022-124912)
Suzuki V-Strom Foot peg lowering Kit -Normally £41.40
Not recommended for off-road use!
This is a lowering kit which moves the foot pegs of the V-Strom down about 25mm and slightly forward by about 5mm. This results in a more relaxed and comfortable ride as the legs are in a slightly less bent position.
The kit consists of two 6mm thick laser profiled and machined plates and all the fasteners needed to make the conversion.
All fasteners are stainless steel. The plates woud be powder coated in black satin finish to match your frame - in the images they are shown silver for clarity.
The gear lever is adjustable to accommodate the change of foot peg position and the fasteners provided allow you to lower the linkage on the rear brake so that the brake lever still feels like its in the original position.
The kit is powder coated Satin Black as standard, and comes with good, clear instructions.
Suzuki V Strom and DL 1000 Gear Change Enhancer(Sprocket Spacer) -Normally £41.78
I strongly suggest you read the testimonial on this part in the Testimonial & Feedback section on the home page, the results are really quite amazing.
Suzuki V Strom and DL 1000 Gear Change Enhancer. Awesome bit of kit, amazing results.
Just been confirmed to fit on 2018 V Strom DL8 1000cc
This part fits the V Strom and the DL 1000cc and is one of the most amazing performing parts I have ever made. It turns a normally `clunky` gear change into something quite amazingly smooth. I was first told about the problem, and the solution, by a really nice geezer and I set to manufacture a solution. The part itself is laser cut and finished by hand, of course, and is cunningly made to a certain thickness to put right a geometry `problem` on the 1000cc bikes as the front and rear sprocket are out of true by the smallest amount yet enough to cause a clunky gear change.
The result of fitting my part is quite amazing and if you do not have a distinct improvement then I offer an unconditional lifetime money back promise. If you take a look at my site you will see a testimonial, done by a Police Traffic Officer, reporting on the improvement.
It is not as easy to fit as all the other parts I make but with some basic skills, a torque wrench and some common sense it can be fitted quite easily though I do stress that if you are unsure then get a qualified mechanic to fit it. It comes with full instructions of course.
Not recommended for off-road use!
This is a lowering kit which moves the foot pegs of the V-Strom down about 25mm and slightly forward by about 5mm. This results in a more relaxed and comfortable ride as the legs are in a slightly less bent position.
The kit consists of two 6mm thick laser profiled and machined plates and all the fasteners needed to make the conversion.
All fasteners are stainless steel. The plates woud be powder coated in black satin finish to match your frame - in the images they are shown silver for clarity.
The gear lever is adjustable to accommodate the change of foot peg position and the fasteners provided allow you to lower the linkage on the rear brake so that the brake lever still feels like its in the original position.
The kit is powder coated Satin Black as standard, and comes with good, clear instructions.
Suzuki V Strom and DL 1000 Gear Change Enhancer(Sprocket Spacer) -Normally £41.78
I strongly suggest you read the testimonial on this part in the Testimonial & Feedback section on the home page, the results are really quite amazing.
Suzuki V Strom and DL 1000 Gear Change Enhancer. Awesome bit of kit, amazing results.
Just been confirmed to fit on 2018 V Strom DL8 1000cc
This part fits the V Strom and the DL 1000cc and is one of the most amazing performing parts I have ever made. It turns a normally `clunky` gear change into something quite amazingly smooth. I was first told about the problem, and the solution, by a really nice geezer and I set to manufacture a solution. The part itself is laser cut and finished by hand, of course, and is cunningly made to a certain thickness to put right a geometry `problem` on the 1000cc bikes as the front and rear sprocket are out of true by the smallest amount yet enough to cause a clunky gear change.
The result of fitting my part is quite amazing and if you do not have a distinct improvement then I offer an unconditional lifetime money back promise. If you take a look at my site you will see a testimonial, done by a Police Traffic Officer, reporting on the improvement.
It is not as easy to fit as all the other parts I make but with some basic skills, a torque wrench and some common sense it can be fitted quite easily though I do stress that if you are unsure then get a qualified mechanic to fit it. It comes with full instructions of course.
MPN:
FALSE
Brand:
Cymarc
Weight:
0.6kg
Customer reviews
5 Stars
100%
4 Stars
0%
3 Stars
0%
2 Stars
0%
1 Stars
0%
Foot peg lowering kit
Top marks, beautifully made and coated, fitted very easily,decent price.
Pete Tidball | York | February 2022